Disclaimer

The written and video guides shown below are for information purposes only. Ark Showers recommends that only trained professionals install our bathtub shower screens and warns its customers that the installation of shower doors performed by those who are not professionally qualified or trained to do so could result in serious bodily injury or property damage. Ark Showers accepts no responsibility for such damage or injury resulting from the installation of its products.

Please Note:

It is important to leave a gap of 3/8"-1/2" between the bottom of the glass and the tub ledge to allow for the bottom sweep (seal). If the gap is smaller than this the sweep will fit too snugly and the shower screen will not open/close properly.

Written Guide:

To download a document illustrating the installation of our frameless bathtub screen, click here.

Video guide:

Below is a two part video showing the installation of one of our frameless shower screens.

Part 1 – Attach the hinges to the glass

Part 2 – Drill the holes, fix the hinges to the wall and attach the sweeps